-
Buttweld CapsProduct Name: Domed Weld On Pipe Capsread more
Specifications: DN15-DN1200
Wall thickness: SCH5-SCH160
Length: 89-343mm
Standard: ASME, DIN, JIS, BS, GB/T, JB, SH, HG... -
180 Degree Silicone ElbowProduct Name: 180 degree elbowread more
Production Range:
OD (Out Diameter): NPS 1/2 to NPS 48 (DN15-1200)
T (Thickness): SCH20 to SCH XXS
Main Standard: ANSI &ASME... -
Steel Welded Pipe FittingsProduct Name: steel welded pipe fittingsread more
Production Range:
OD (Out Diameter): NPS 1/2 to NPS 48 (DN15-1200)
T (Thickness): SCH20 to SCH XXS
Main Standard: ANSI &ASME... -
Hexagon Socket Head CapProduct Name: hexagon socket head capread more
Size: M6~M64
Length: 15mm~1500mm (according to customer’s requirement)
Material: Steel, Galvanized Steel (according to customer’s... -
Piping Steel End CapProduct Name: piping steel end capread more
Production Range:
OD (Out Diameter): NPS 1/2 to NPS 56( DN15-1400 )
W.T (Thickness): SCH20 to SCH XXS
Main Standard: ANSI... -
Threaded ReducerPlace of Origin: Hebei, Chinaread more
Brand Name: Hebei Huayang
Technics: Forged
Connection: Thread
Shape: Reducing
Head Code: Hexagon -
Male Thread PlugProduct Name: male thread plugread more
OD: 1/8"- 4"
Pressure: 3000LB/ 6000LB
Standard: ANSI B16.11, ASME, GB, DIN, JIS
Material: A105, A182 F304 316 316L WPHY52-WPHY70,... -
Steel Half CouplingProduct Name: steel half couplingread more
Sizes (mm): 17~265
Materials: Carbon Steel, Stainless -
Hydraulic Half CouplingsProduct Name: Hydraulic Half Couplingsread more
Sizes (mm): DN40~DN400
Finish: According to the needs of customers
Standard: JB/T 7355-1994
Pipe Fittings End Connection Type Pipe Elbow The Elbow is used more than any other pipe fittings. It provides flexibility to change the pipe direction. Elbow is mainly available in two standard types...
Elbow fittings serve a similar purpose, but they’re L-shaped so that they can connect angled pipes or pipes that point in different directions. Adapters are another kind of brass compression...
Charlotte Pipe 1-1/2-in 2-ft L Plain End Schedule 40 ABS DWV Pipe. ABS fittings are for drain, waste and vent purposes only. They are used in gravity fed waste elimination systems and are for...
Elbow fittings serve a similar purpose, but they’re L-shaped so that they can connect angled pipes or pipes that point in different directions. Adapters are another kind of brass compression fitting....
Slip the pipe into the socket and weld. Low-Pressure Press-Connect Stainless Steel Unthreaded Pipe Fittings Press these fittings onto stainless steel pipe using a crimping tool for a...
Pipe Elbow dimensions are covered in ASME B16.9. Refer to the table given below for the dimension of the elbow size 1/2″ to 48″. Pipe Fittings Dimensions Tolerance as per ASME B16.9 Pipe FIttings...

